To use this library you must to provide functions for both reading and writing the I2C bus. Function definitions must be the following.
int32_t i2c_read(void *handle, uint8_t address, uint8_t reg, uint8_t *buffer, uint16_t size);
int32_t i2c_write(void *handle, uint8_t address, uint8_t reg, const uint8_t *buffer, uint16_t size);Where address is the I2C address, reg is the register to read or write, buffer holds the data to write or read into and size is the amount of data to read or write. The handle parameter is an optional customizable argument. You can use it if your I2C implementation requires any additional information such has number of the hardware I2C driver. For example HAL implementation see ESP I2C helper. For working example see M5StickC kitchen sink.
$ make menuconfig
#include "axp192.h"
#include "user_i2c.h"
float vacin, iacin, vvbus, ivbus, temp, pbat, vbat, icharge, idischarge, vaps, cbat;
uint8_t power, charge;
axp192_t axp;
/* Add pointers to HAL functions. */
axp.read = &user_i2c_read;
axp.write = &user_i2c_write;
/* You could set the handle here. It can be pointer to anything. */
axp.handle = NULL;
axp192_init(&axp);
axp192_read(&axp, AXP192_ACIN_VOLTAGE, &vacin);
axp192_read(&axp, AXP192_ACIN_CURRENT, &iacin);
axp192_read(&axp, AXP192_VBUS_VOLTAGE, &vvbus);
axp192_read(&axp, AXP192_VBUS_CURRENT, &ivbus);
axp192_read(&axp, AXP192_TEMP, &temp);
axp192_read(&axp, AXP192_TS_INPUT, &vts);
axp192_read(&axp, AXP192_BATTERY_POWER, &pbat);
axp192_read(&axp, AXP192_BATTERY_VOLTAGE, &vbat);
axp192_read(&axp, AXP192_CHARGE_CURRENT, &icharge);
axp192_read(&axp, AXP192_DISCHARGE_CURRENT, &idischarge);
axp192_read(&axp, AXP192_APS_VOLTAGE, &vaps);
printf(
"vacin: %.2fV iacin: %.2fA vvbus: %.2fV ivbus: %.2fA vts: %.2fV temp: %.0fC "
"pbat: %.2fmW vbat: %.2fV icharge: %.2fA idischarge: %.2fA, vaps: %.2fV",
vacin, iacin, vvbus, ivbus, vts, temp, pbat, vbat, icharge, idischarge, vaps
);
axp192_ioctl(&axp, AXP192_READ_POWER_STATUS, &power);
axp192_ioctl(&axp, AXP192_READ_CHARGE_STATUS, &charge);
printf("power: 0x%02x charge: 0x%02x", power, charge);
axp192_ioctl(&axp, AXP192_COULOMB_COUNTER_ENABLE, NULL);
axp192_read(&axp, AXP192_COULOMB_COUNTER, &cbat);
printf("cbat: %.2fmAh", cbat);
/* Misc ioctl functions. */
axp192_ioctl(&axp, AXP192_LDO2_SET_CONTROL, AXP192_DISABLE);
axp192_ioctl(&axp, AXP192_LDO2_SET_CONTROL, AXP192_ENABLE);
axp192_ioctl(&axp, AXP192_LDO3_SET_CONTROL, AXP192_DISABLE);
axp192_ioctl(&axp, AXP192_LDO3_SET_CONTROL, AXP192_ENABLE);
axp192_ioctl(&axp, AXP192_DCDC3_SET_CONTROL, AXP192_DISABLE);
axp192_ioctl(&axp, AXP192_DCDC3_SET_CONTROL, AXP192_ENABLE);
axp192_ioctl(&axp, AXP192_GPIO0_SET_LEVEL, AXP192_HIGH);
axp192_ioctl(&axp, AXP192_GPIO0_SET_LEVEL, AXP192_LOW);
axp192_ioctl(&axp, AXP192_GPIO1_SET_LEVEL, AXP192_HIGH);
axp192_ioctl(&axp, AXP192_GPIO1_SET_LEVEL, AXP192_LOW);
axp192_ioctl(&axp, AXP192_GPIO2_SET_LEVEL, AXP192_HIGH);
axp192_ioctl(&axp, AXP192_GPIO2_SET_LEVEL, AXP192_LOW);
axp192_ioctl(&axp, AXP192_GPIO4_SET_LEVEL, AXP192_HIGH);
axp192_ioctl(&axp, AXP192_GPIO4_SET_LEVEL, AXP192_LOW);