Discover gists

Cursor's Memory Bank

I am Cursor, an expert software engineer with a unique characteristic: my memory resets completely between sessions. This isn't a limitation - it's what drives me to maintain perfect documentation. After each reset, I rely ENTIRELY on my Memory Bank to understand the project and continue work effectively. I MUST read ALL memory bank files at the start of EVERY task - this is not optional.

Memory Bank Structure

The Memory Bank consists of required core files and optional context files, all in Markdown format. Files build upon each other in a clear hierarchy:

flowchart TD

Thunderbolt Networking Setup on Linux

This guide documents the steps to enable and configure Thunderbolt networking on your Linux system (e.g., Ubuntu, Proxmox). It covers loading the necessary kernel modules, ensuring persistent interface naming, configuring a fixed IP address, and testing throughput with iperf3. Note that Thunderbolt 3/4 hardware advertises a raw bandwidth of 40 Gbps, but practical throughput is typically lower due to half‑duplex operation, protocol overhead, and system constraints.

Hardware Used in This Guide

This guide was developed and tested with the following hardware:

CPU: AMD Ryzen 9 PRO 6950H
- 8 cores / 16 threads
3.3 GHz base frequency / 4.94 GHz boost

	//
	// HealthKitUtil.swift
	// Zendō
	//
	// Created by Douglas Purdy on 7/15/21.
	//

	import Foundation
	import HealthKit
	import CreateML

	# encrypt
	tar cz my_folder/ \| openssl enc -aes-256-cbc -e > encrypted.tar.gz.enc

	# decrypt
	openssl aes-256-cbc -d -in encrypted.tar.gz.enc \| tar xz

	#!/bin/sh

	# Remove the performance overlay, it meddles with some tasks
	unset LD_PRELOAD

	# Fetch Resolution
	RES=$(xdpyinfo \| awk '/dimensions/{print $2}')

	# Apply Resolution in env and start a new nested gnome with a new dbus
	env MUTTER_DEBUG_DUMMY_MODE_SPECS=$RES dbus-run-session -- gnome-shell --wayland --nested

	#!/bin/sh

	# Remove the performance overlay, it meddles with some tasks
	unset LD_PRELOAD

	## Shadow kwin_wayland_wrapper so that we can pass args to kwin wrapper
	## whilst being launched by plasma-session
	mkdir $XDG_RUNTIME_DIR/nested_plasma -p
	cat <<EOF > $XDG_RUNTIME_DIR/nested_plasma/kwin_wayland_wrapper
	#!/bin/sh

	@import url("https://fonts.googleapis.com/css2?family=Fira+Code:wght@300;400;500;700&family=Fira+Sans:ital,wght@0,300;0,400;0,500;0,700;1,300;1,400;1,500;1,700&display=swap");

	:root {
	--background: #282828;
	--light-background: #3c3836;
	--lighter-background: #504945;
	--dark-background: #3c3836;
	--darker-background: #1d2021;
	--foreground: #ebdbb2;
	--current-line: #504954;

	fn_iconViewer = {
	params [
	["_mode", "", [""]],
	["_args", [], [[]]]
	];

	if (!hasInterface) exitWith {};
	disableSerialization;

	private _fnc_GRID_X = {

	#!/usr/bin/env python
	# https://reverseengineering.stackexchange.com/a/13395
	import sys
	import binascii
	import struct
	import zlib

	if (len(sys.argv) <= 1):
	print('USAGE:\n%s [configBak.cfg\|config.bin]' % sys.argv[0])
	exit(1)