embedded-hal

Target atsamd microcontrollers using Rust

Implementation of the `embedded-hal` traits for Linux devices

Crate for sharing buses between multiple devices

embedded-hal implementation for Rust on ESP32 and ESP-IDF

Nuclei RISC-V Software Development Kit

Hardware abstract layer (HAL) `embedded-hal` for RISC-V microcontroller GD32VF103 in Rust. Contributions welcomed!

Rust example programs for many of my hardware device drivers running on STM32F3 Discovery, STM32F103 "Blue Pill", micro:bit and other boards

Rust driver for SSD1675 e-Paper display controller

Hardware Abstract Layer for BL602 RISC-V WiFi + BLE SoC in embedded Rust

Rust's hardware abstract layer (HAL) for K210 chip, a dual RV64GC SoC with hardware accelerated AI peripherals. Contributions welcomed!

Rust APIs and abstractions for various embedded services (WiFi, Network, Httpd, Logging, etc.)

Check https://github.com/ftdi-rs project for the up-to-date implementation of FTDI MPSSE embedded HAL.

A platform agnostic Rust driver for the Bosch BM[PE]-280

A platform agnostic driver to interface the MFRC522 (RFID reader/writer)

Platform agnostic Rust driver for 24x series serial EEPROM devices using embedded-hal

Implements embedded-hal traits by bitbanging

Platform-agnostic Rust driver for the PCA9685 I2C 16-channel, 12-bit PWM/Servo/LED controller

Platform-agnostic Rust driver for the ADS1x1x ultra-small, low-power analog-to-digital converters (ADC). Compatible with ADS1013, ADS1014, ADS1015, ADS1113, ADS1114 and ADS1115

[WIP] embedded-hal for the STM32WB family of microcontrollers

STM32 + Rust + RTIC embedded project

Building an embedded Rust application on top of the ASF4 C vendor library

Platform agnostic Rust driver for the CCS811 ultra-low power digital gas sensor for monitoring indoor air quality

Rust embedded-hal based driver for the DHT11/DHT22 sensor

A platform agnostic driver to interface with the LSM303DLHC (accelerometer + compass)

Rust workspace for Raspberry Pi 4 bare metal things

Platform agnostic Rust driver for the MAX3010x high-sensitivity pulse oximeter and heart-rate sensor for wearable health

HAL for the RI5CY core of RV32M1 heterogeneous (two ARM and two RISC-V) quad-core SoC.

A platform agnostic driver to interface with the L3GD20 (gyroscope)

Audio Effects Circuit Design & Embedded Systems (STM32F407 microcontroller) Design Project. Goal: with an analog audio input, pitch shift or add echo effect and output to a speaker. Circuit: designed AC level shifting circuit, active bandpass filter, LED matrix display and DAC quantization error smoothing in KiCad; manufactured as a printed circuit board; soldered components and tested PCB. Embedded Systems: FFT to extract frequency domain; NVIC with timer-raised interrupts to service analog sampling, button debouncing, and image display on LED matrix; memory and clock cycle optimizations