Robotics

The uncompensated temperature of the BMP180 is incorrectly converted to a 16-bit signed value, instead of a 32-bit signed value (long). Since the data is 16-bits wide and can therefore not be negative, the easy fix would be to do the following:

sip.js(1128): uncompensated = uint16(data[0], data[1]);

Please see page 15 of the manual of the BMP180 chip:
https://ae-bst.resource.bosch.com/media

The lightware SF11C (at least) outputs 130m "on lost signal" so we should handle this in the AP_LightwareSerial driver.

Here's the relevant line in the SF11 datasheet:

As mentioned b

From an office hours discussion.. many people have written small gym-like interfaces around Drake. We should provide one in drake master and a tutorial showing how to use it.

Here is the relevant documentation from gym. I'm not worried about the repo name / file structure advice, but simply aim to provide the famil

Steps to Reproduce

1. Create empty directory with the wizard
2. Add a robot and a join
3. In view, add "Show join axes"
4. Nothing seems to happens, because the line is too small

Expected behaviour
A line should appear.

Expected solution
Change the default lineScale value to 10, which make it visible, at least for a default project.
Two solutions, change the default templa

Ankit Shah and I are trying to use Gen to support a project and would love the addition of a dirichlet distribution